When a DC current passes through a long straight conductor a magnetising force, H and a static magnetic field, B is developed around it If the wire is then wound into a coil, the magnetic field is greatly intensified producing a static magnetic field around itself forming the shape of a bar magnet giving a distinct North and South pole.
The magnetic flux developed around the coil being proportional to the amount of current flowing in the coils windings as shown. If additional layers of wire are wound upon the same coil with the same current flowing through them, the static magnetic field strength would be increased.
Therefore, the magnetic field strength of a coil is determined by the ampere turns of the coil. With more turns of wire within the coil, the greater the strength of the static magnetic field around it.
But what if we reversed this idea by disconnecting the electrical current from the coil and instead of a hollow core we placed a bar magnet inside the core of the coil of wire. By moving this bar magnet “in” and “out” of the coil a current would be induced into the coil by the physical movement of the magnetic flux inside it.
Likewise, if we kept the bar magnet stationary and moved the coil back and forth within the magnetic field an electric current would be induced in the coil. Then by either moving the wire or changing the magnetic field we can induce a voltage and current within the coil and this process is known as Electromagnetic Induction and is the basic principle of operation of transformers, motors and generators.
Electromagnetic Induction was first discovered way back in the 1830’s by Michael Faraday. Faraday noticed that when he moved a permanent magnet in and out of a coil or a single loop of wire it induced an ElectroMotive Force or emf, in other words a Voltage, and therefore a current was produced.
So what Michael Faraday discovered was a way of producing an electrical current in a circuit by using only the force of a magnetic field and not batteries. This then lead to a very important law linking electricity with magnetism, Faraday’s Law of Electromagnetic Induction.
When the magnet shown below is moved “towards” the coil, the pointer or needle of the Galvanometer, which is basically a very sensitive centre zero’ed moving-coil ammeter, will deflect away from its centre position in one direction only. When the magnet stops moving and is held stationary with regards to the coil the needle of the galvanometer returns back to zero as there is no physical movement of the magnetic field.
Likewise, when the magnet is moved “away” from the coil in the other direction, the needle of the galvanometer deflects in the opposite direction with regards to the first indicating a change in polarity. Then by moving the magnet back and forth towards the coil the needle of the galvanometer will deflect left or right, positive or negative, relative to the directional motion of the magnet.
Electromagnetic Induction by a Moving Magnet
Likewise, if the magnet is now held stationary and ONLY the coil is moved towards or away from the magnet the needle of the galvanometer will also deflect in either direction. Then the action of moving a coil or loop of wire through a magnetic field induces a voltage in the coil with the magnitude of this induced voltage being proportional to the speed or velocity of the movement.
Then we can see that the faster the movement of the magnetic field the greater will be the induced emf or voltage in the coil, so for Faraday’s law to hold true there must be “relative motion” or movement between the coil and the magnetic field and either the magnetic field, the coil or both can move.
Faraday’s Law of Induction
From the above description we can say that a relationship exists between an electrical voltage and a changing magnetic field to which Michael Faraday’s famous law of electromagnetic induction states: “that a voltage is induced in a circuit whenever relative motion exists between a conductor and a magnetic field and that the magnitude of this voltage is proportional to the rate of change of the flux”.
Electric motor
Electric motor, any of a class of devices that convert electrical energy to mechanical energy, usually by employing electromagnetic phenomena. Most electric motors develop their mechanical torque by the interaction of conductors carrying current in a direction at right angles to a magnetic field. The various types of electric motor differ in the ways in which the conductors and the field are arranged and also in the control that can be exercised over mechanical output torque, speed, and position.
Principle of operation
The basic principle on which motors operate is Ampere's law. This law states that a wire carrying an electric current produces a magnetic field around itself. Imagine that current is flowing through The presence of that current creates a magnetic field around the wire. Since the loop itself has become a magnet, one side of it will be attracted to the north (N) pole of the surrounding magnet and the other side will be attracted to the south (S) pole of the magnet. The loop will begin to rotate.
AC motors. What happens next depends on the kind of electric current used to run the motor, direct (DC) or alternating (AC) current. With AC current, the direction in which the current flows changes back and forth rapidly and at a regular rate.
In the United States, the rate of change is 60 times per second, or 60 hertz (the unit of frequency).
In an AC motor, then, the current flows first in one direction through the wire loop and then reverses itself about 1/60 second later. This change of direction means that the magnetic field produced around the loop also changes once every 1/60 second. At one instant, one part of the loop is attracted by the north pole of the magnet, and at the next instant, it is attracted by the south pole of the magnet.
But this shifting of the magnetic field is necessary to keep the motor operating. When the current is flowing in one direction, the right hand side of the coil might become the south pole of the loop magnet. It would be repelled by the south pole of the outside magnet and attracted by the north pole of the outside magnet. The wire loop would be twisted around until the right side of the loop had completed half a revolution and was next to the north pole of the outside magnet.
If nothing further happened, the loop would come to a stop, since two opposite magnetic poles—one from the outside magnet and one from the wire loop—would be adjacent to (located next to) each other. And unlike magnetic poles attract each other. But something further does happen. The current changes direction, and so does the magnetic field around the wire loop. The side of the loop that was previously attracted to the north pole is now attracted to the south pole, and vice versa. Therefore, the loop receives another "kick," twisting it around on its axis in response to the new forces of magnetic attraction and repulsion.
Thus, as long as the current continues to change direction, the wire loop is forced to spin around on its axis. This spinning motion can be used to operate any one of the electrical appliances mentioned above.
Capacitor
A capacitor is a device for storing electrical energy. Capacitors are used in a wide variety of applications today. Engineers use large banks of capacitors, for example, to test the performance of an electrical circuit when struck by a bolt of lighting. The energy released by these large capacitors is similar to the lightning bolt. On another scale, a camera flash works by storing energy in a capacitor and then releasing it to cause a quick bright flash of light. On the smallest scale, capacitors are used in computer systems. A charged capacitor represents the number 1 and an uncharged capacitor a 0 in the binary number system used by computers.
- GPSC Mains 2024 Tests and Notes Program
- GPSC Prelims Exam 2024- Test Series and Notes Program
- GPSC Prelims and Mains 2024 Tests Series and Notes Program
- GPSC Detailed Complete Prelims Notes